Technical features and options
Dimensions of elements:
- Length: min. 300, max. 3000
- Width: min. 100:2, max. 1200:2
- Max. speed: 50 m
- Working height: approx. 1020 mm
- Machine base: double base made of steel, with fixed and moving elements, equipped with linear guides with ball recirculation 45 mm
- Usable opening: max. 1600 mm.
Columns:
- The right and left supporting columns that hold the device’s columns, the lower arms guide the rails, and the upper arms are pressure arms.
- The movable bracket is on the right side, and the fixed bracket is on the left side.
- The motorized transverse movement of the movable column is driven by a ball screw with a closed loop, sliding along linear guides and pre-loaded with ball bearings in a closed loop.
- Electronic transverse movement of the movable column with an inverter controlled numerically.
Feeding:
- The feeding unit is powered by a geared motor controlled by an inverter for smooth speed adjustment, which is numerically controlled.
- The large drive shaft has a diameter of 80 mm and is equipped with a double-ground keyway.
- Working speed up to 60 m/min.
